• surface_poly_fit.cli
  • surface_poly_fit.cli.get_argument_parser
    • get_argument_parser()
  • surface_poly_fit.cli.read_polyhedral_surface
    • read_polyhedral_surface()
  • surface_poly_fit.cli.surface_poly_fit_cli
    • surface_poly_fit_cli()
  • surface_poly_fit.cli.surface_poly_fit_main_cli
    • surface_poly_fit_main_cli()
  • surface_poly_fit.cli.write_result_array
    • write_result_array()
• surface_poly_fit.core
  • surface_poly_fit.core.MongeJetFitter
    • MongeJetFitter
    • surface_poly_fit.core.MongeJetFitter.__init__
    • surface_poly_fit.core.MongeJetFitter.convert_result_to_point_data
    • surface_poly_fit.core.MongeJetFitter.fit_all
    • surface_poly_fit.core.MongeJetFitter.fit_at_vertex
    • surface_poly_fit.core.MongeJetFitter.get_field_data
    • surface_poly_fit.core.MongeJetFitter.to_meshio_mesh
    • surface_poly_fit.core.MongeJetFitter.PCA
    • surface_poly_fit.core.MongeJetFitter.RING_NORMAL_GAUSSIAN_WEIGHTED_MEAN
    • surface_poly_fit.core.MongeJetFitter.RING_NORMAL_GAUSSIAN_WEIGHTED_MEAN_SIGMA
    • surface_poly_fit.core.MongeJetFitter.RING_NORMAL_MEAN
    • surface_poly_fit.core.MongeJetFitter.VERTEX_NORMAL
    • surface_poly_fit.core.MongeJetFitter.degree_monge
    • surface_poly_fit.core.MongeJetFitter.degree_poly_fit
    • surface_poly_fit.core.MongeJetFitter.min_num_fit_points
    • surface_poly_fit.core.MongeJetFitter.poly_surface
    • surface_poly_fit.core.MongeJetFitter.ring_normal_gaussian_sigma
  • surface_poly_fit.core.PolyhedralSurface
    • PolyhedralSurface
    • surface_poly_fit.core.PolyhedralSurface.__init__
    • surface_poly_fit.core.PolyhedralSurface.create_ring_patch
    • surface_poly_fit.core.PolyhedralSurface.from_meshio_mesh
    • surface_poly_fit.core.PolyhedralSurface.get_face_normals
    • surface_poly_fit.core.PolyhedralSurface.get_faces
    • surface_poly_fit.core.PolyhedralSurface.get_vertex_normals
    • surface_poly_fit.core.PolyhedralSurface.get_vertices
    • surface_poly_fit.core.PolyhedralSurface.set_vertex_normals
    • surface_poly_fit.core.PolyhedralSurface.to_meshio_mesh
    • surface_poly_fit.core.PolyhedralSurface.num_faces
    • surface_poly_fit.core.PolyhedralSurface.num_vertices
• surface_poly_fit.results_to_mesh
  • surface_poly_fit.results_to_mesh.get_argument_parser
    • get_argument_parser()
  • surface_poly_fit.results_to_mesh.read_results
    • read_results()
  • surface_poly_fit.results_to_mesh.results_to_mesh_cli
    • results_to_mesh_cli()
  • surface_poly_fit.results_to_mesh.results_to_mesh_main_cli
    • results_to_mesh_main_cli()
  • surface_poly_fit.results_to_mesh.write_result_mesh
    • write_result_mesh()
• surface_poly_fit.tests
  • surface_poly_fit.tests.create_monge_surface
    • create_monge_surface()
  • surface_poly_fit.tests.MongeJetFitterTest
    • MongeJetFitterTest
    • surface_poly_fit.tests.MongeJetFitterTest.__init__
    • surface_poly_fit.tests.MongeJetFitterTest.addClassCleanup
    • surface_poly_fit.tests.MongeJetFitterTest.addCleanup
    • surface_poly_fit.tests.MongeJetFitterTest.addTypeEqualityFunc
    • surface_poly_fit.tests.MongeJetFitterTest.countTestCases
    • surface_poly_fit.tests.MongeJetFitterTest.debug
    • surface_poly_fit.tests.MongeJetFitterTest.defaultTestResult
    • surface_poly_fit.tests.MongeJetFitterTest.doClassCleanups
    • surface_poly_fit.tests.MongeJetFitterTest.doCleanups
    • surface_poly_fit.tests.MongeJetFitterTest.export_mesh
    • surface_poly_fit.tests.MongeJetFitterTest.id
    • surface_poly_fit.tests.MongeJetFitterTest.run
    • surface_poly_fit.tests.MongeJetFitterTest.setUp
    • surface_poly_fit.tests.MongeJetFitterTest.setUpClass
    • surface_poly_fit.tests.MongeJetFitterTest.shortDescription
    • surface_poly_fit.tests.MongeJetFitterTest.skipTest
    • surface_poly_fit.tests.MongeJetFitterTest.subTest
    • surface_poly_fit.tests.MongeJetFitterTest.tearDown
    • surface_poly_fit.tests.MongeJetFitterTest.tearDownClass
    • surface_poly_fit.tests.MongeJetFitterTest.test_construct
    • surface_poly_fit.tests.MongeJetFitterTest.test_fit
    • surface_poly_fit.tests.MongeJetFitterTest.test_fit_all
    • surface_poly_fit.tests.MongeJetFitterTest.test_fit_all_bounding_area
    • surface_poly_fit.tests.MongeJetFitterTest.test_oriented_fit
    • surface_poly_fit.tests.MongeJetFitterTest.test_properties
    • surface_poly_fit.tests.MongeJetFitterTest.test_to_meshio_mesh
    • surface_poly_fit.tests.MongeJetFitterTest.longMessage
    • surface_poly_fit.tests.MongeJetFitterTest.maxDiff
  • surface_poly_fit.tests.MongePolynomial
    • MongePolynomial
    • surface_poly_fit.tests.MongePolynomial.__init__
    • surface_poly_fit.tests.MongePolynomial.evaluate
    • surface_poly_fit.tests.MongePolynomial.b
    • surface_poly_fit.tests.MongePolynomial.c
    • surface_poly_fit.tests.MongePolynomial.k
  • surface_poly_fit.tests.PolyhedralSurfaceTest
    • PolyhedralSurfaceTest
    • surface_poly_fit.tests.PolyhedralSurfaceTest.__init__
    • surface_poly_fit.tests.PolyhedralSurfaceTest.addClassCleanup
    • surface_poly_fit.tests.PolyhedralSurfaceTest.addCleanup
    • surface_poly_fit.tests.PolyhedralSurfaceTest.addTypeEqualityFunc
    • surface_poly_fit.tests.PolyhedralSurfaceTest.countTestCases
    • surface_poly_fit.tests.PolyhedralSurfaceTest.debug
    • surface_poly_fit.tests.PolyhedralSurfaceTest.defaultTestResult
    • surface_poly_fit.tests.PolyhedralSurfaceTest.doClassCleanups
    • surface_poly_fit.tests.PolyhedralSurfaceTest.doCleanups
    • surface_poly_fit.tests.PolyhedralSurfaceTest.export_mesh
    • surface_poly_fit.tests.PolyhedralSurfaceTest.id
    • surface_poly_fit.tests.PolyhedralSurfaceTest.run
    • surface_poly_fit.tests.PolyhedralSurfaceTest.setUp
    • surface_poly_fit.tests.PolyhedralSurfaceTest.setUpClass
    • surface_poly_fit.tests.PolyhedralSurfaceTest.shortDescription
    • surface_poly_fit.tests.PolyhedralSurfaceTest.skipTest
    • surface_poly_fit.tests.PolyhedralSurfaceTest.subTest
    • surface_poly_fit.tests.PolyhedralSurfaceTest.tearDown
    • surface_poly_fit.tests.PolyhedralSurfaceTest.tearDownClass
    • surface_poly_fit.tests.PolyhedralSurfaceTest.test_construct
    • surface_poly_fit.tests.PolyhedralSurfaceTest.test_create_ring_patch
    • surface_poly_fit.tests.PolyhedralSurfaceTest.test_face_normals
    • surface_poly_fit.tests.PolyhedralSurfaceTest.test_from_meshio_mesh
    • surface_poly_fit.tests.PolyhedralSurfaceTest.test_set_vertex_normals
    • surface_poly_fit.tests.PolyhedralSurfaceTest.test_to_meshio_mesh
    • surface_poly_fit.tests.PolyhedralSurfaceTest.test_vertex_normals
    • surface_poly_fit.tests.PolyhedralSurfaceTest.longMessage
    • surface_poly_fit.tests.PolyhedralSurfaceTest.maxDiff
  • surface_poly_fit.tests.SurfacePolyFitImportTest
    • SurfacePolyFitImportTest
    • surface_poly_fit.tests.SurfacePolyFitImportTest.__init__
    • surface_poly_fit.tests.SurfacePolyFitImportTest.addClassCleanup
    • surface_poly_fit.tests.SurfacePolyFitImportTest.addCleanup
    • surface_poly_fit.tests.SurfacePolyFitImportTest.addTypeEqualityFunc
    • surface_poly_fit.tests.SurfacePolyFitImportTest.countTestCases
    • surface_poly_fit.tests.SurfacePolyFitImportTest.debug
    • surface_poly_fit.tests.SurfacePolyFitImportTest.defaultTestResult
    • surface_poly_fit.tests.SurfacePolyFitImportTest.doClassCleanups
    • surface_poly_fit.tests.SurfacePolyFitImportTest.doCleanups
    • surface_poly_fit.tests.SurfacePolyFitImportTest.export_mesh
    • surface_poly_fit.tests.SurfacePolyFitImportTest.id
    • surface_poly_fit.tests.SurfacePolyFitImportTest.run
    • surface_poly_fit.tests.SurfacePolyFitImportTest.setUp
    • surface_poly_fit.tests.SurfacePolyFitImportTest.setUpClass
    • surface_poly_fit.tests.SurfacePolyFitImportTest.shortDescription
    • surface_poly_fit.tests.SurfacePolyFitImportTest.skipTest
    • surface_poly_fit.tests.SurfacePolyFitImportTest.subTest
    • surface_poly_fit.tests.SurfacePolyFitImportTest.tearDown
    • surface_poly_fit.tests.SurfacePolyFitImportTest.tearDownClass
    • surface_poly_fit.tests.SurfacePolyFitImportTest.test_import_surface_poly_fit
    • surface_poly_fit.tests.SurfacePolyFitImportTest.test_import_surface_poly_fit_spf_cgal
    • surface_poly_fit.tests.SurfacePolyFitImportTest.test_surface_poly_fit_spf_cgal_polyhedral_surface
    • surface_poly_fit.tests.SurfacePolyFitImportTest.longMessage
    • surface_poly_fit.tests.SurfacePolyFitImportTest.maxDiff
  • surface_poly_fit.tests.SurfacePolyFitTest
    • SurfacePolyFitTest
    • surface_poly_fit.tests.SurfacePolyFitTest.__init__
    • surface_poly_fit.tests.SurfacePolyFitTest.addClassCleanup
    • surface_poly_fit.tests.SurfacePolyFitTest.addCleanup
    • surface_poly_fit.tests.SurfacePolyFitTest.addTypeEqualityFunc
    • surface_poly_fit.tests.SurfacePolyFitTest.countTestCases
    • surface_poly_fit.tests.SurfacePolyFitTest.debug
    • surface_poly_fit.tests.SurfacePolyFitTest.defaultTestResult
    • surface_poly_fit.tests.SurfacePolyFitTest.doClassCleanups
    • surface_poly_fit.tests.SurfacePolyFitTest.doCleanups
    • surface_poly_fit.tests.SurfacePolyFitTest.export_mesh
    • surface_poly_fit.tests.SurfacePolyFitTest.id
    • surface_poly_fit.tests.SurfacePolyFitTest.run
    • surface_poly_fit.tests.SurfacePolyFitTest.setUp
    • surface_poly_fit.tests.SurfacePolyFitTest.setUpClass
    • surface_poly_fit.tests.SurfacePolyFitTest.shortDescription
    • surface_poly_fit.tests.SurfacePolyFitTest.skipTest
    • surface_poly_fit.tests.SurfacePolyFitTest.subTest
    • surface_poly_fit.tests.SurfacePolyFitTest.tearDown
    • surface_poly_fit.tests.SurfacePolyFitTest.tearDownClass
    • surface_poly_fit.tests.SurfacePolyFitTest.longMessage
    • surface_poly_fit.tests.SurfacePolyFitTest.maxDiff